The new 850 HD Pro was created following the request to build a RIB with special features: plenty of space on board; possibility of fitting out according to the different needs of professional owners; great sturdiness of construction; and finally, but not least, an unequivocally Marlin RIB with its characteristic unmistakable lines, attention to detail, and great quality and functionality. Thus a professional RIB was born, where particular attention was paid to the design of the structures and spaces on board where it is possible to stow equipment and equipment, without hindering the user.
At the extreme bow there is a stainless steel big bollard supported by a pulpit, the anchor locker with a new design already prepared for mounting the electric winch under the top of the locker; the anchor, which emerges from the extreme bow wheel just below the tubules, remains protected by the latter, allowing you to approach the dock or other boats without fear.
In addition to a very large locker that extends even under the walking surface, there is a locker on the floor where you can easily mount a water tank or equip at will.The locker below the stern area, unlike almost all of these RIBS, is accessible; this allows, in the fitting phase, to mount systems and batteries in this area, but also, during the molding of the hull, to join the deck to the hull from the inside: a fundamental guarantee of resistance to the very high stresses to which these types of boats are subjected.
The floor, made in fiberglass sandwich and high density Termanto, has a length of 5 meters and a width of 2 where it will be possible to decide the layout of the various settings.
The driving console with a limited longitudinal dimension, but capable of protecting two pilots and accommodating any electronic equipment in the large panel.
The tubes, built with 1670 Dtex fabric and reinforced with non-slip material, is developed on two levels, low aft to lean on the surface and give the boat greater stability in all conditions, high in the bow, and not to interfere with the motion wave during navigation, both to build high internal walls that give crew absolute protection and safety.
This particular profile, designed and patented by Marlin Boat in 1993, was adopted for all the yard’s models, making it a real trademark.
The strength of the hull is guaranteed by coupling three different moldings: the deck, the reinforcement “spider” and the hull which are firmly joined together forming a monolith of exceptional resistance to stress.
The resin processes are performed using the highest quality materials, such as Neopentyl Gel Coat and Vinylester Resin to avoid osmosis phenomena.
The new Marlin 850 HD Pro will also be presented in a superequipped GT version, with bow sundeck and rear sofa, hard top and other exclusive accessories, especially designed for recreational use, which is also well suited for use as a luxury tender, where the exceptional characteristics of sturdiness and construction will be maintained.
Design Category - B
Overall Length - 850 cm
Homologation Length - 850 cm
Internal Length - 775 cm
Overall width - 318 cm
Internal width - 194 cm
Tubular Diameter - 62 cm
Weight without Motors - 1450 kg
Capacity of People - 16
Maximum Power - 1X450HP 2X250 HP
Compartments - 7
Stern height - 1-XXL 2-XL
Fuel tank capacity - 420 lt
Water tank capacity - 80 lt
Tube Material - Neoprene - Hypalon 1600gr/30m²
Bottom - GRP Triple hull molding
2 stainless steel 300 mm stern cleats
3 external stainless steel eyebolts
4 lifting eyebolts
Inox bow bollard with pulpit and pass-bys
20 mm perimeter handrail rope
Two-seat guide console with windscreen, stainless steel handrail, drawer and front door
Front locker for anchor and chain
Front locker for stowage
Electric inflator and pressure gauge
Electrical system with 8 users panel
Kit u-shaped stern sofa with cushions
Kit bow sunbathing with cushions
Floor re-flex foam kit
Lifting strops kit with shackles
Automatic bilge pump
Stainless steel ladder with handrail
Two-seat guide seat with anatomical fiberglass and stainless steel cushion
Water tank 80 lt with shower and pump
420 liter stainless steel tank
Steering and seat covers
1600 D Tex heavy fabric tubular with non-slip reinforcements
Anchor windlass with chain and stainless steel anchor 7,5kg
Tubes: artic grey
Water skiing towing pole
Stern underwater led lights
Stainless steel and fybreglass hard top with led lights
Deck courtesy blu led lights
Floor solid teak 6 mm kit
Stainless steel rollbar with lights
Stainless steel rollbar with lights and extensible bimini
Stainless steel sliding support for auxiliary motor
Table with removable pedestal
Bimini for hard top with carbon poles
Stainless steel 4 arch bimini
Hydraulic steering tilt single cylinder 350/700 hp
Tubes color variant
Cushions color variant
Grey fiberglass ral 7046 color variant
Black fiberglass color variant